Love To Scrap 2

It’s OK…

Hey everybody! Happy Monday – I hope you had a great weekend! I’m up on the CutCardStock blog today with a tutorial for making a super cute candy corn themed card. There are always a ton of posts around Halloween from people who really dislike candy corn, and when I saw this cut file, I laughed so hard and knew I had to have it! The cut file is from Printable Cuttable Creatables and I used Cougar Smooth White, Pop Tone Black Licorice, Lessebo Brick Orange, and Lessebo Sunflower Yellow cardstock to cut the pieces. And I happened to have some candy corn patterned paper in my stash so it really works!

I started by making the candy corn focal using the Printable Cuttable Creatables Don’t Like You Candy Corn SVG Cut File and my Cricut Explore Air 2. I cut the pieces from our Cougar Smooth White, Pop Tone Black Licorice, Lessebo Brick Orange, and Lessebo Sunflower Yellow cardstock. After assembling the candy corn focal, I cut a standard A2 top-folding card base and strip from CutCardStock Pop Tone Black Licorice cardstock. Next, I cut a layering panel from CutCardStock Lessebo Brick Orange and a layering panel and strip from coordinating papers in the Simple Stories Spooky Nights Collection. I rounded the bottom right corner of each and assembled the card. This couldn’t have been any easier!

I cut the inside panel from Cougar Smooth White and embellished it with leftover strips of the candy corn paper and orange cardstock used on the front. I added three candy corn stickers and a sentiment from the Simple Stories Collection Pack, which completed the card.

Affiliate links are used in this post at no cost to you – I really appreciate your support!

CutCardStock products used:
Cougar Smooth 100# White cardstock
Cougar Smooth 80# White cardstock
Pop Tone Black Licorice cardstock
Lessebo Brick Orange cardstock
Lessebo Sunflower Yellow cardstock

Other products used:
PAPER: Simple Stories Spooky Nights Collection Pack (papers and stickers)
DIES/PUNCHES: Printable Cuttable Creatables Don’t Like You Candy Corn SVG Cut File, Kadomaru Pro Corner Rounder
ACCESSORIES: Cricut Explore Air 2, Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Elmer’s Craft Bond Tape Runner, My Sweet Petunia Precision Glue Press, Nuvo Deluxe Adhesive, Scrapbook Adhesives 3D Foam Squares (small black)

I hope you’ve enjoyed today’s project and you’re inspired to get crafty! Be sure to check out all the awesome cardstock and other goodies at CutCardStock (adhesives, labels, stickers, pens, watercolors and ribbon to name a few). And head on over to the CutCardStock Facebook Page and for more inspiration! Also, be sure to join our Creating with CutCardStock Facebook Group for even more crafty inspiration! Thanks so much for stopping by today – we’ll see you next time!

Scrappy hugs,

Spooky Cats & Witchy Hats

Howdy peeps! I hope you’re having a great weekend – I’ve had my nose buried in my crafting. So what else is new?! Bahahaha! Our weather has been cooling off for several weeks now and it’s just glorious. I’m always happy when we no longer need the A/C. I have a fun ScrapbookingStore DT inspiration project to share with you today created with items in the October 2025 Scrapbook Kit with Upgrades. I made a circle pop-out card which turned out so cute because it’s so simple. I’ve had handwritten instructions in my tutorial folder for quite some time although I don’t remember where I initially saw it. I just recently caught a glimpse of it on Connie Stewart’s YouTube channel HERE which reminded me that it’s on my long list of folds I want to try, so I made it! I hope you enjoy it.

I cut the card base and stitched circle die cuts (using the Love From Lizi Stitched Circle Nested Cutting Dies) from CutCardStock Lessebo Brick Orange cardstock. I also cut a smaller stitched circle (using the same Love From Lizi die set) from Lessebo Sunset Orange and a scalloped circle using a Spellbinders Standard Scalloped Circles Small die to layer the sentiment sticker on. Then I cut layering panels from a super cute plaid print in the Photo Play Halloween Junque Collection Pack. I remembered I had some black cat sequins in my stash so I added a few of them to tie in the black cat on the sentiment.

I cut the inside panel from CutCardStock Basis 80# Natural cardstock and embellished it with a strip of another print in the collection. I added another sentiment sticker from the sticker sheet and added another black cat sequin, and BOOM, the card was finished. Love how it turned out!

Affiliate links are used in this post at no cost to you – I really appreciate your support!

ScrapbookingStore products:
October 2025 Scrapbook Kit with Upgrades:
Photo Play Halloween Junque Collection Pack
Upgrades: Carta Bella Halloween Chipboard Accents
Carta Bella Halloween Frames & Tags
Ranger Hocus Pocus Distress Mica Stain

Other products used:
CARDSTOCK/PAPER: CutCardStock Lessebo Brick Orange, Lessebo Sunset Orange, Pop Tone Black Licorice and Basis 80# Natural cardstock
DIES/PUNCHES: Love From Lizi Stitched Circle Nested Cutting Dies, Spellbinders Standard Scalloped Circles Small dies
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Spellbinders 12×12 Scoring Board, My Sweet Petunia Precision Glue Press, Bearly Art precision craft glue, Big Shot, Scrapbook Adhesives E-Z Runner Grand Permanent Strips, velcro circle, black cat sequins from stash

I hope you’ve enjoyed today’s project and you’re thinking about all the fun you could have with this month’s kit… you really ought to think about joining the Subscription Club! Be sure to Follow us on Facebook, Instagram, Pinterest and YouTube for lots of crafty inspiration! And if you do decide to join the Subscription Club, join our ScrapbookingStore Club Member Group on Facebook for more inspiration and to share your projects! Thanks so much for stopping by today – we’ll see you next time!

Scrappy hugs,

Eat, Drink & Be Scary

Hey everybody, happy weekend! I hope your weather is cooling off some and you’re able to enjoy some time outdoors. I have a fun ScrapbookingStore DT inspiration project to share with you today created with items in the October 2025 Scrapbook Kit with Upgrades. The book fold is one of the coolest (and easy) fun folds and it looks good in square or regular A2 size which is what I created in portrait orientation for today’s share.

I cut the book-style card base from CutCardStock Basis 110# Natural cardstock along with layering panels from a paper in the collection which I split into two uneven pieces for a little interest. I added a sticker from the sticker sheet to the spine along with a chipboard element from the Carta Bella Halloween Chipboard Accents in the upgrades (with Lawn Fawn black twine looped beneath it) which I popped up on Scrapbook Adhesives 3D foam circles. The finishing touch was adding a small sentiment sticker (also from the sticker sheet) to the upper right corner.

I cut the inside panel from CutCardStock Basis 80# Natural cardstock and embellished it with a paper strip and sentiment and star stickers from the sticker sheet. I layered the panel on another print from the collection, and this completed the card.

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Other products used:
CARDSTOCK/PAPER: CutCardStock Basis Natural 110# and Basis Natural 80# cardstock
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Spellbinders 12×12 Scoring Board, My Sweet Petunia Precision Glue Press, Bearly Art precision craft glue, Lawn Fawn Black Hemp Twine; Scrapbook Adhesives E-Z Runner Grand Permanent Strips, E-Z Runner Micro Permanent Strips, 3D Foam Circles and Mounting Squares

Scrappy hugs,

Unfiltered Poison

Happy Friday, y’all! I hope you’ve had a great week and you’re looking forward to some fun this weekend. I have a fun ScrapbookingStore DT inspiration project to share with you today created with items in the October 2025 Scrapbook Kit with Upgrades. I have made a ton of triple fold cards over the years but the faux triple fold is one of my favorites because it gives the illusion of a triple fold but it’s really just regular bi-fold that opens from left to right. The secret is adhering the middle section down to the right-hand flap. It’s a fun one, for sure!

I cut the card base from CutCardStock Basis Black cardstock along with layering panels from assorted prints in the Photo Play Halloween Junque Collection Pack in this month’s kit. I created the focal element on the front using Love From Lizi Stitched Label Nesting Cutting Dies, and embellished it with an additional round die cut created with a Love From Lizi Stitched Circle Nesting Cutting Die along with stickers from the sticker sheet.

I also added a piece of ephemera from the Carta Bella Halloween Frames & Tags (in the upgrades) to the upper right corner of the right-hand panel which I popped up on a thin foam square as well as a magnet closure. I also added some glitter-embellished circles to the left-hand panel for a little interest. These were made with Scrapbook Adhesives 3D Circles using the ‘Wear Your Adhesive On The Outside’ technique which I have fallen in love with!

Here is a shot of the card opening up.

I embellished the inside panels with stickers from the sticker sheet and added a sentiment from the Carta Bella Halloween Frames & Tags in the upgrades.

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Other products used:
CARDSTOCK/PAPER: CutCardStock Basis Black cardstock
DIES/PUNCHES: Love From Lizi Stitched Label Nested Cutting Dies and Stitched Circle Nested Cutting Dies, Kadomaru Pro Corner Rounder
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Spellbinders 12×12 Scoring Board, My Sweet Petunia Precision Glue Press, Bearly Art precision craft glue, Making Memories Scrapbook Shimmer- Brown Glitter; Scrapbook Adhesives by 3L E-Z Runner Grand Permanent Strips and 3D Foam Circles; Ranger Distress Collage Medium, small disc magnet

Scrappy hugs,

Thank you for being a part of my story

Hey everybody, happy Wednesday! I hope your week is going along nicely! I’m up on the Scrapbook Pal blog today sharing a tutorial for making a fun book-themed thank you card featuring the Pinkfresh Studio Twilight Tales Stamps, Stencils and Dies! OMGoodness, this is such a fun suite of products to work with! They make THE best projects for your book-loving friends or family!

I won’t go into huge detail here since there is a tutorial on the Scrapbook Pal website, but I used a Neenah Classic Crest 110# card base which I covered with patterned paper from the Lawn Fawn Watercolor Wishes Rainbow 6×6 Petite Paper Pack. The large focal image is stamped, stenciled, and die cut using products from the Pinkfresh Studio Twilight Tales suite.

I used a variety of Ranger distress oxide inks – which have rapidly become my FAV for stenciling. They blend like butter, y’all, and have THE best silky smooth texture! I added a little bit of detail here and there with Nuvo Gloss White Crystal Drops which took on the color of the ink that looks very cool.

I cut the inside panel from 80# Solar White cardstock, embellished it with a leftover strip of the paper used on the front, and layered it on CutCardStock Basis Gold cardstock. Both the front and inside sentiments were stamped in Versafine Onyx Black ink and cut with the coordinating dies in the collection.

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Scrapbook Pal products used:
Lawn Fawn Watercolor Wishes Rainbow 6×6 Petite Paper Pack
Pinkfresh Studio Twilight Tales Stamps
Pinkfresh Studio Twilight Tales Stencils
Pinkfresh Studio Twilight Tales Dies
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
MISTI Stamp Tool
Ranger Wild Honey Distress Oxide Ink
Ranger Fossilized Amber Distress Oxide Ink
Ranger Fired Brick Distress Oxide Ink
Ranger Picked Raspberry Distress Oxide Ink
Ranger Wilted Violet Distress Oxide Ink
Ranger Broken China Distress Oxide Ink
Ranger Tiny Blending Tools
Ranger Tiny Blending Foams
Ranger-Wendy Vecchi 7″ Make Art Stay-tion
Spellbinders 5/8” Best Ever Craft Tape
My Sweet Petunia Glue Press
Bearly Art Precision Craft Glue
Scrapbook Adhesives E-Z Runner Permanent Strips
Scrapbook Adhesives Thin 3D Foam Squares White

Other products used:
CARDSTOCK/PAPER: Neenah Classic Crest 110# Solar White A2 Folded Card Base and 80# Solar White cartdstock; CutCardStock Savoy 100% Cotton Brilliant White and Basis Gold cardstock
INK: EK Success Dual-Tip Gold Pen, Sakura Clear Star Gelly Roll Pen
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Big Shot, Nuvo Gloss White Crystal Drops, Brutus Monroe Topaz Flat Back Crystals, Trinity Pick Up Stick

I hope you’ve enjoyed this project and you’re inspired to get your craft on! Be sure to check out the awesome array of craft supplies in the Scrapbook Pal store… the selection is amazing! And head over to the Scrapbook Pal Facebook, Pinterest and Instagram pages for more design team inspiration! And if you haven’t yet subscribed to our YouTube Channel, be sure to do that, too, for tons of hands-on crafty inspiration! Thanks so much for stopping by today – we’ll see you next time!

Scrappy hugs,

hello Friend accordion diorama

Hey everybody, happy Wednesday – I hope you’re having a good week! I’m up on the Scrapbook Adhesives By 3L blog today sharing a tutorial for making an accordion diorama card. This is my debut project as a new designer on this amazing team and I’m over the moon excited! I used a variety of products and they are all listed below. You know I love me some fun folds and I’m always scouting around for new ones to try. I saw a card similar to this one on Pinterest a while back – and once again there was no information about it – so I took a stab at recreating it. The first one I made was a bit more tedious than it needed to be so I ended up fine-tuning it a bit and thus this second version was born. In the end it wasn’t too difficult and I love how it turned out!

Card base was cut from CutCardStock Lessebo Navy Blue cardstock along with layering panels from Doodlebug Design Rainbow Petite Prints (buffalo check-woodgrain and floral-graph). I used the Scrapbook.com Nested A2 Arches Dies for the aperture, along with ribbon and lace from Really Reasonable Ribbon for embellishments. Also used the Hero Arts Here For You Stamp & Die Bundle and paper pieced the floral using two more Doodlebug Design Rainbow Petite Prints (gingham-linen and dot-stripe).

I used quite a few Scrapbook Adhesives products to bring this card to life (all listed below), and even employed the ‘Wear Your Adhesive on the Outside’ technique by adding blue foil to small and medium adhesive dots to make shiny embellishments for the front. OMGosh, it’s SO cool – you need to try it!

I added a sentiment panel with a stamped sentiment to the back, and included a side shot below so you can see the construction. Definitely a fun card to make! If you want to learn how to make it, be sure to see my tutorial on the Scrapbook Adhesives blog!

Scrapbook Adhesives By 3L products used:
E-Z Runner Grand Permanent Strips Refillable Dispenser
Dual Tip Glue Pen
Crafty Power Tape Polybag 81 ft
Adhesive Sheets 4 x 6 in
3D Foam Christmas Shapes
Metallic Transfer Foil Sheets Pastel Colors
E-Z Dots Permanent Dispenser
Mounting Squares 250 White

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Other products used:
CARDSTOCK/PAPER: CutCardStock Lessebo Navy Blue cardstock, Neenah Classic Crest 80# Solar White cardstock; Doodlebug Design Rainbow Petite Prints- buffalo check-woodgrain, floral-graph, gingham-linen and dot-stripe
STAMPS: Hero Arts Here For You Stamp & Die Bundle
INK: Versafine Onyx Black, Memento Tuxedo Black Marker, Bic Mark-It Fine Point Marker- Woodsey Brown
DIES/PUNCHES: Scrapbook.com Nested A2 Arches Dies, Hero Arts Here For You Stamp & Die Bundle
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Mini MISTI, Big Shot, Grafix Crystal Clear Craft Plastic, Really Reasonable Ribbon blue ribbon, small wooden bow maker, Nuvo Dark Walnut Crystal Drops

I hope you’ve enjoyed this project and you’re inspired to get your crafty supplies out and play! Be sure to check out the awesome array of adhesives and other craft supplies Scrapbook Adhesives By 3L has to offer! And be sure to follow us on Facebook, Pinterest, Instagram and Twitter for lots of crafty inspiration! And if you haven’t yet subscribed to our YouTube Channel, be sure to do that, too, for even more inspiration! Thanks so much for stopping by today – we’ll see you next time!

Scrappy hugs,

Celebrate

Hey everybody, happy Wednesday – how is it that we are a week into October already?! Has it cooled off any where you are? It’s absolutely gorgeous here and definitely my favorite time of year! I’m up on the Love From Lizi blog today with a tutorial for making yet another version of the double flap fun fold. I used papers and embellishments from the October Autumn Breeze release along with some already in the store. It’s an amazing release, and even though it’s Autumn/Fall themed, I thought ‘outside the box’ and created a fun friendship card that could be used for a variety of occasions. I have to tell you that I’ve made a lot of fun folds over the years – and there have been quite a few that I said were the ‘easiest ever’ – but this one really IS the easiest ever to make!

Card base and label die cut for the second flap were cut from CutCardStock Lessebo Pitch Black cardstock, using the Stitched Label Nested Cutting Dies for the labels. I cut the patterned paper layers from coordinating prints in the A Spot of Autumn 6×6 paper pack. The sentiments and embellishments are from the A Spot of Autumn Thicker Stickers and Mini Stickers. The finishing touch on the front was adding a few gemstones from the Tropical Escapes Mixed Size Gems.

I die cut an additional label from Neenah Classic Crest 80# Solar White cardstock for the inside and added another sentiment and embellishments from the A Spot of Autumn Thicker Stickers and Mini Stickers. See how easy this was?! Check out my tutorial on the Love From Lizi blog if you’d like more detailed instructions. I’d love to know if you make one!

Love From Lizi products used:
A Spot of Autumn 6×6 Paper Pack
A Spot of Autumn Thicker Stickers
A Spot of Autumn Mini Stickers
Stitched Label Nested Cutting Dies
Tropical Escapes Mixed Size Gems

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Other products used:
CARDSTOCK/PAPER: CutCardStock Lessebo Pitch Black cardstock, Neenah Classic Crest 80# Solar White cardstock
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Spellbinders 12×12 Scoring Board, My Sweet Petunia Precision Glue Press, Bearly Art precision craft glue, Big Shot, Scrapbook Adhesives E-Z Runner Permanent Strips

I hope you’ve enjoyed seeing this project and you’re inspired to get crafty! Be sure to join our Facebook Group and Follow us on Instagram and YouTube for lots of crafty inspiration! Thanks so much for stopping by today – we’ll see you next time!

Scrappy hugs,

HUGS shadow box card

Hey everybody, happy weekend – I hope you’re doing something fun! I’m delighted to share a Scrapbook Pal DT inspiration project with you today featuring the Pinkfresh Studio Shadow Box Frame dies and the Altenew Dynamic Duo: Precious Poppies stamps and stencils, along with lots of other products on the website! I’ve made a few shadow box fun fold cards over the years but this one is literally a shadow box and stands for display! It was so stinkin’ fun to make!

I started by constructing the shadow box frame using the Pinkfresh Studio Shadow Box Frame Dies and Neenah Classic Crest 165# Solar White cardstock which is super sturdy. I embellished the front and sides of the frame with strips of a green and gold speckled print from the Lawn Fawn Spiffier Speckles 6×6 Petite Paper Pack, and also added a panel of a coordinating print from the same paper pad to the back of the frame. I used the My Sweet Petunia Glue Press with Bearly Art precision craft glue for all the construction.

Using the Altenew Dynamic Duo: Precious Poppies Stamps, MISTI Stamp Tool and Memento Tuxedo Black Ink, I stamped the main image on a piece of the 165# Solar White cardstock and left the stamp in the MISTI. Then I stenciled the poppies using the Altenew Dynamic Duo: Precious Poppies Stencils, Ranger Tiny Blending Tools and Foams, and Ranger Candied Apple, Abandoned Coral, Peeled Paint, and Shabby Shutters Distress Oxide Inks, securing each stencil with Spellbinders 5/8″ Best Ever Craft Tape.

I put the stenciled cardstock back into the MISTI and stamped again in Versafine Onyx Black ink to get good, crisp lines. I then stamped the sentiment (from the same stamp set) in Versafine Onyx Black ink, trimmed it, and adhered it with Scrapbook Adhesives 3D Foam Squares. The final touch was adding several red rhinestones from the Keep It Simple Sprinkles collection and several gold pearls from the Kat Scrappiness Gold Pearl Mix. I’ve included a couple additional shots below. Totally love how this turned out!

Scrapbook Pal products used:
Pinkfresh Studio Shadow Box Frame Dies
Lawn Fawn Spiffier Speckles 6×6 Petite Paper Pack
Altenew Dynamic Duo: Precious Poppies Stamps and Stencils
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
MISTI stamp tool
Spellbinders Best Ever Craft Tape
Ranger Candied Apple Distress Oxide Ink
Ranger Abandoned Coral Distress Oxide Ink
Ranger Peeled Paint Distress Oxide Ink
Ranger Shabby Shutters Distress Oxide Ink
Ranger Tiny Blending Tools
Ranger Tiny Blending Foams
My Sweet Petunia Glue Press
Bearly Art precision craft glue
Scrapbook Adhesives 3D Foam Squares White

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Other products used:
CARDSTOCK/PAPER: Neenah Classic Crest Double Thick 165# Solar White cardstock
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Big Shot, Keep It Simple Sprinkles-Red Rhinestones, Kat Scrappiness Gold Pearl Mix

Scrappy hugs,

Bon Voyage

Hey everybody, happy Friday – and I want to know how it’s the first Friday in October already?! This is hands-down my favorite time of the year – it’s our first Fall here at our new home and it’s absolutely gorgeous. I’m up on the CutCardStock blog today with a tutorial for making a cruise-themed box card. I used a variety of our red, white, blue and black cardstock along with the Cruise Ship Box Card SVG cut file from Simply Crafty SVGs. This was such a fun project and I love how it turned out!

Using my Cricut Explore Air 2 and the Cruise Ship SVG cut file from Simply Crafty SVGs, I cut all the pieces from Cougar Smooth 110# White 12×12, Pop Tone Black Licorice, Pop Tone Red Hot, Patriot Blue cardstock and Blue Hydrangea, and Cougar Smooth 80# White 12×12 cardstock. I had a ball assembling this card, like I usually do, lol! I used the Print then Cut function on my Cricut for the front sentiment which completed the card.

I stamped a sentiment from the Stampin’ Up Let’s Set Sail stamp set in Versafine Onyx Black ink. This was a fun one! Since I didn’t go into many details in this post, be sure to see my tutorial on the CutCardStock blog if you want more info!

Affiliate links are used in this post at no cost to you – I really appreciate your support!

CutCardStock products used:
Cougar Smooth 110# White 12×12 cardstock
Cougar Smooth 80# White 12×12 cardstock
Pop Tone Black Licorice cardstock
Pop Tone Red Hot cardstock
Patriot Blue cardstock
Blue Hydrangea cardstock
Tombow Mono Multi Purpose Liquid Glue

Other products used:
STAMPS: Stampin’ Up Let’s Set Sail stamp set
INK: Versafine Onyx Black ink
DIES/PUNCHES: Simply Crafty SVGs Cruise Ship SVG cut file
ACCESSORIES: Cricut Explore Air 2, , MISTI stamp tool, Doodlebug Design Lily White Doodle Twine, Scrapbook Adhesives Thin 3D Foam Squares, Scrapbook Adhesives 3D Foam Squares

Scrappy hugs,

Witchy Woman

Hey everybody, happy Friday! I hope you have something fun planned this weekend! Our new challenge went live this morning over at Creative Creases, and my contribution for Challenge #108 is a Halloween-themed tented easel card. I used papers and die cut pieces from the Keep It Simple A Wee Bit Wicked collection, Keep It Simple Halloqueen Sentiments stamps and dies, and the Witch Hazel stamp set from Art by Mi Ran (sold by Keep It Simple). I love how this turned out! Come on over and play with us – anything goes with a fun fold!

The measurements to make this card are super simple – card base is 4-1/4″ x 11″, scored at 4-1/4″ and 8-1/2″, making the folded card 4-1/4″ square. Front layering panel is 4″ x 4″ and bottom layering panel is 2-1/4″ x 4″ with a white layering panel for the inside cut at 4″ x 4″.

I cut the card base from CutCardStock Lessebo Pitch Black cardstock along with layering panels and a strip ‘stopper’ cut from coordinating papers in the Keep It Simple A Wee Bit Wicked 6×9 Collection Pack. I stamped the Witch Hazel image on Neenah Classic Crest Solar White cardstock, colored her with alcohol markers, and then fussy cut her. I popped her up on foam strips and added her to the card front along with a couple layered moons from the Keep It Simple A Wee Bit Wicked Wee Bits Die Cut Pieces and a sentiment stamped in black ink from the A Wee Bit Wicked Halloqueen Sentiments stamp set and cut with the coordinating outline die.

I cut the inside panel from Solar White cardstock and embellished it with a leftover strip of cobweb paper used on the front. I stamped a sentiment from the Keep It Simple A Wee Bit Wicked Halloqueen Sentiments stamp set in black ink and added an additional piece of ephemera from the A Wee Bit Wicked Wee Bits Die Cut Pieces.

Affiliate links are used in this post at no cost to you – I really appreciate your support!

Products used:
CARDSTOCK/PAPER: CutCardStock Lessebo Pitch Black cardstock, Neenah Classic Crest 80# Solar White cardstock, Keep It Simple A Wee Bit Wicked 6×9 Collection Pack
STAMPS: Keep It Simple Art by Mi Ran Witch Hazel stamp set and A Wee Bit Wicked Halloqueen Sentiments stamp set
INK: Memento Tuxedo Black ink; Spectrum Noir Tri-Blends- FS6/7/8, EB5/6/7, GB6/7/10, IG6/8/9, CT1/2/3, JG1/2/3, GY2/3/5, HB1/2/3
DIES/PUNCHES: Keep It Simple A Wee Bit Wicked Halloqueen outline dies
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Elmer’s Craft Bond Tape Runner, Bearly Art precision craft glue, MISTI stamp tool, Big Shot, Keep It Simple A Wee Bit Wicked Wee Bits Die Cut Pieces, Scotch 3M foam strip

I hope you’ve enjoyed seeing this project and will link up with us this time! Thanks so much for stopping by today – we’ll see you next time! ;)

Scrappy hugs,